Cropping your photograhs

Print of the whole negative

When it come to cropping your prints there are two schools of thought. Those that believe that once the view has been carefully framed in the camera, you should print the whole negative and in some cases include the rebate as well to prove it. The alternative view is that each image is unique and should be judged as such irrespective of its format.

My stance tends to follow the latter view or what best emphasis the composition whole frame or part of. It does not always follow that what your pre visualized view at the time translates to the baseboard when it comes to printing. 

It is important to consider how you're going to frame the image at the beginning of the printing process. The start of which is the contact print once produced time should be taken to consider what is best for each picture. In some cases it is an automatic decision how the picture is going to look. In others it is not quite so clear as to what is right. In these situations it maybe better to print the whole negative and use a crop tool to ensure what framing brings the best out of the image. 

Cropped for impact

Setting hard and fast rules when it comes to producing your pictures will prove detrimental in conveying the vision. It is better to keep an open mind and be bold in the way you frame your pictures. Sometimes it is good to seek other peoples opinions they may offer an idea that you have not considered, but remember these are suggestions that should not be followed blindly. You should only do what others indicate if you truly believe that it is the best for the composition and coincides with your vision for the picture.

I crop photo's for a number of reasons some listed below:

• 

  change story

  To remove unwanted items from the picture that sometimes get missed in the making process from around the edges.
• To correct a bad holding angel.
• To remove processing faults, dust hair etc.
• To change the balance and or emphasis of elements in the picture.
• To change the format of the picture.
• To remove dead areas from pictures tightening the composition.
• To create a better sense of intimacy.
• To improve composition.
• To tell a different story. If you are doing this then you should give serious consideration to the facts of the situation before changing the emphasis especially from a photojournalists perspective.

Crop tool.

You can use a crop tool which was mentioned earlier. It can help to improve how you compose images at the making stage. It is a way of training your eye.

Crop tool made from

They are simple to make as described below:

You can make a crop tool out of two bits of cardboard it needs to be 50 to 75mm (2” to 3”) wide and 500 x 400mm (20” x 16”) long or bigger than the largest print you are likely to make. If you do not want to make it completely from scratch then you can use a pre cut mount frame cut to make two L shapes. This allows the framing of the picture to be infinite.

This simple idea allows you to try out those more radical ideas along with the more prosaic to see if they work. It may surprise you in the process.

Dodging and burning.

A selection of dodgers 

They are darkroom tools to help bring out all the detail from your negatives when printing. 



Holding back

No matter how well you expose and develop your negatives, when it comes to making a positive you will need to equalize the exposure by holding back and burning in to keep the detail in the highlights and shadow areas. In a lot of cases it is not possible to alter the overall exposure time to take these deficiency's in to account. In these cases dodgers as the name implies will help you get round this problem. You can use your hands, fingers, pieces of card, a length of wire with a cut out of  card stuck to it and cards with holes in them. 

Burnning in

Dodgers work by casting a shadow over the area that needs less exposure than the rest of the picture. Likewise dodgers with holes in them are used for burning in areas that require more light than the rest of the photograph. This is also a type of holding back as it stops the correctly exposed picture from becoming over exposed. When using a dodger you must keep it moving otherwise it will produce a hard outline to the area you are trying to correct. It can be moved from side to side or up and down to stop this happening. The amount of time you use your dodger for will depend on what your test strip shows.  If you have not got a test strip then it will be trial and error taking a number of prints before you get it right. With experience the amount of error will diminish. 

Dodgers are not just for correcting problems, they are there also for creative purposes for example to bring out some extra drama in the scene, add a shaft of light where there was none or to bring two pictures together where one maybe lacking any sky detail.