Pages

Friday, 30 November 2012

Print washing

Wash tray

For some time now I have been looking for a way to improve my print washing. This is more to do with how well they are washed when I have a batch of half a dozen or so processed prints. At the moment I use a homemade tray that is sloped, with running water coming in at the top and is dammed at the bottom to create a reservoir before flowing through holes that control the level. But this only allows me to wash a couple of prints at a time which needs to be agitated now and again by hand. The solution would be a slot style washer.

This has been a thorn in my mind for sometime, that now needs to be removed. So before I build a new one I should do some research. I started off by asking a question on FADU

First of all we need to go back a step to the fixing process, because what you do here has a big bearing on how well and quickly your prints are washed. I prefer to use a rapid fix which is a plus point but it needs to be timed correctly. Next it is a good idea to place the newly fixed print straight into a water bath and agitate for a minute before placing in the hypo clearing; which is a must for FB papers in reducing wash time. ( I no long use Hypo clearing because my new wash method has shown it's not needed) When it comes to RC papers I exclude the Hypo as the papers absorption rate is next to nothing.

It is a myth that it takes longer for the salts to be removed from the fibers of FB paper because it gets embedded. In fact it is the emulsion side that resists their release.

When I embarked on this research I had not envisaged how complex the wash process was. I suspect not many others give it the consideration it needs either.

Thursday, 8 November 2012

Out of date HP5+ develpoed in ID11


Lomo Fisheye two
Now that my brain is back in gear I can get on with developing that errant 35mm HP5+. Hopefully it should go without a hitch.



As far as I can remember (going by recent events that’s a bit dubious) this film is about seven years out of date. With this in mind you would of thought I should have picked a camera that allowed ISO adjustments. I didn't! Lomo's fisheye 2 was the camera chosen meaning that the HP5+ would have to be exposed at box speed (400 iso) Unlike a lot of people I don't have a problem with box speed and anyway it is in the best tradition of the toy camera cult along with Light leaking cameras, plastic lens, unpredictable focus and a lot of fun.


When it comes to box speed Ilford suggest that HP5+ should be developed for thirteen minutes at 20 degrees C. in ID11. From what I can remember of this all round developer it should produce negatives that are not very grainy. Normally I would have developed the film at the indicated time and be dammed. But something at the back of my mind said that fifteen minutes would do a better job and I prefer the negatives to be a bit on the dense side which translates to clear defined rectangles of tone. This must not be over done though as increasing the printing times could lead to over heating the negative making it buckle in the negative carrier of the enlarger. Leading to out of focus or soft pictures.


After all these years I still get the little bit of apprehension as I do a quick check of the film just before the wash stage. I need not have worried as I remove the reel from the developing tank I can just make out a line of rectangles along the film. The proof of the pudding will be when I print them.





 

I am very pleased with the way these negatives have printed. There is no sign of grain even though they have been enlarged to fit 9.5”x12” paper. I have used Silverproof matt paper at grade three and processed in Moersch 6 blue tone developer. Which produces a rich blue black that does not translate very well from scanned pictures.