Spiraling trouble?

Putting this lot back together was fun.

Y eh! right, there is no way I'm going to start separating a plastic spiral once the film had been processed. I was of that mind set until I started to use medium format film. In the old days I would gently unpick the 35mm film from the spool unwinding it slowly so as not to damage it. Then I was confronted with having to reset the spiral so it would take 120 film and because this film has a larger surface it is very easy to damage as I have found out.

Looking back I have to say what was all the fuss about. I think it is a lot to do with the unknown. If I take it apart will I ever get it back together? I will, just takes a bit of time. In my case the first time was easy I just gripped both sides of the spiral and twisted till it went click. Then gently pulled it apart until it reached the top slot and twisted it back the other way. Done! There that was not so bad. Huh! Not quite as clever as you thought, when it came to doing it again! I couldn't get it to go back together again no matter what I tried. It took ages to get those slots to meet up the right way and then they were backwards. Just before exasperation set in I put them down. Made a cup of tea and chilled. What makes it more maddening is when I went back to the spiral it went straight together with out a hitch.

Now a days it is second nature, don't be fooled it does not always go right first time.

Developer shelf life.

The keeping qualities of photographic chemicals to a degree is dependent on the dilution of the mix. In the first instance you should always follow the manufactures recommendation when mixing stock solutions by only adding the chemical to that quantity of water thus giving you a known starting point. If you require a more dilute working developer you should only make this up just before you are about to use it. Once used it should be discarded.

Reusable developers are poured back into their containers when finished with. Each time you pour it back a little bit is used up, it is a good idea to keep these containers full to stop the developer going off. This can be achieved in several ways if it is a plastic bottle you can squeeze the air out just before you nip the cap up, add glass marbles to the bottle so increasing its level, use a concertina bottle or the plastic bag out of a wine box ( if using one of these make sure it has been thoroughly cleaned.)

Remember that developer that has been used is likely to go off more quickly. It is a good idea to keep a record on each bottle of how many film or prints and what format has been developed. When you think you have reached the maximum usage discard it and make a fresh batch.