Adox art series to be developed in PMK pyro.

Adox art series CHS 100. ISO 100

It has been a long time since I mentioned that I was going to do a test development using PMK Pyro on Adox  CHS 100 art series. What with the weather being unseasonally wet and other things getting in the way I have not been able to do the test exposures. I prefer to take the pictures outside on a bright day without fast moving clouds. Something that has not been forthcoming. The light level needs to be constant for the eighteen frames it takes to produce three test strips of two F numbers over and two F numbers under the metered reading. 

I'm pleased to say that the other day, weather and time to expose the film coincided which has resulted in a film waiting to be developed. Something that requires a spare four hours to do whether all in one go or over several days. See Agfa test formethod.

Light striped prints

Another printing fault is light pollution known as fog. This is assuming it hasn't happened in the camera.

The dark line you see running up this picture
 it the result of light
getting to the light sensitive material. Fogging .

●         It Could be where stray light from a darkroom not properly blacked out has found its way to the light sensitive side of the the paper you're using.

●         Your safe light is too close to the enlarger and or the wrong colour.

●         It can also happen if your enlarger leaks light when being used.

●         Badly stored and out of date paper can also be fogged.

The causes of these faults, also point to ways of curing them. This post suggests a way of detecting light induced fog.