Checking development times?

How do you know that the negatives you are looking at are correctly developed and not under or over exposed. The only way to be sure is to do a test. What follows is a method to help you achieve this:

•   Choose a subject like a view or still life to take a series of photographs.

•   First you will need to determine what the correct exposure should be.

•   Then set the camera settings to two stops under and take the picture.

•   Follow this by setting it to one stop under and take another picture.

•   Now enter the correct exposure settings and press the shutter.

•   Next, one stop over and two stops over respectively.

•   Once you have done this wind the film on two frames and repeat the procedure, once done do the same again with a two frame separation so you now have three test strips.

Once back in the darkroom cut the film into three strips. Give the first section of film half the recommended development time the second set twice the time and the third group the suggested process time. Then compare the combined results of exposure and development and you will be able to clearly see which was developed correctly. It's worth the cost of a film to know that your films have been correctly developed.