Pages

Monday, 6 September 2021

Out of date film Home truths.

The use of out of date film has become very popular over the last few years. So much so that it has become a bit of a sub culture within the film world, with some photographers stating that it is all they use. I get the impression that in some cases there is a bit of grand standing, look at me, my photography is better because of it! If it has improved your picture making then all well and good, but I have to say that some of the images I have seen makes me wonder why did they bother! I personally see no advantage in using out of date, apart from the fact it is slightly less expensive than fresh. 

Lets be honest about this how often do you end up with a blank film?

But then again there is a certain extra thrill in the knowledge that when you take the lid off the developing tank and view the wet film with nicely exposed negatives, a sense of relief at your gay abandonment to the natural order of things was worth the risk. In my experience the risk is very small but if you read some blogs it is a step to far to contemplate.


120 Fujicolour Superia
out of date by 10 years.
So why would you treat out of date film to a different set of process times?

I have always used out of date film long before it became popular. I just keep using the film stock till it runs out. It was not until recent times that I have taken note of the process before date and now that I have that knowledge it has not made any difference to the way I make images and process the film. When comparing them to in date negatives of the same make I can see no difference.




120 Fujicolour Superia
out of date by 10 years.
So how do you store your film?

There is a lot of myth and misunderstanding about how to store your film after you have purchased it. The one thing that destroys film faster than anything else is humidity. Even in these situations, as long as the film is kept in its sealed containers and wrappers (medium format) it will remain in good condition. So common sense would suggest that you only break the film out when you are about to use it. Surely? 





So why would you need to store it in a fridge or freezer?

I used to do this until I was caught out by not getting the film from the fridge the day before. I seriously questioned whether there was any advantage to doing it. Common sense suggested that the weather in the UK never really gets that extreme so why bung the fridge up? -(there was a cheer from the other half when I removed it all!) - after all, I purchased it to use, not stock pile. Obviously everyone's circumstances are different. But I have found a growing number of people who store film in a draw find it more convenient and allows for spontaneity. Not having to second guess myself about will I or Won't I need a film tomorrow has freed up creativity.

 With this in mind I purchased a carton of out of date film. It is a mixed box of T max 400, Ilford delta 100, 3200 and XP2 400. I did this because I had been toying with the idea of trying out TMAX 400, but it then occurred to me that I had never used the others either. So now is my chance. I was told they had all been stored in a draw and were still in the sealed wrappers. Good enough for me! 

This selection of emulsions are a maximum of seven years out of process date. I have used so far the delta 100 and 3200 at box speed. Developed in RO9 @1+50 @20C using my usual method. The results are what I would expect from fresh stock.

There is a down side, it can go wrong occasionally, but it is a lot rarer than people would have you believe and it is more than likely to be human error than failure of materials. Some of you will be uncomfortable with the idea and I understand that reticence, especially if you are new to film photography.

I have written two other posts on the subject: Film storage - is a more technical look and colour out of date - which talks about an old film left in the camera for years. My view on film storage has not changed as these other post will reinforce. Remember do not be influenced by other peoples narrow mindedness. Photography is about being creative and that means there are no rules. 

Out of film Delta 3200, dev RO9,
 printed on Adox MCP

Here is a link to the delta film mentioned earlier in the article.

Updated 2022:

Since writing this there is a downside to out of date film. It is unexpected and inconsistent in its appearance and affects black and white 120 film so far. The main reason for it is the paper backing, for some reason it can produce a blotchy look to the negatives which is most noticeable in the sky detail.  


The following pictures show the affect: 


Technical data:

The black and white images were scanned from photographs. 

Camera used was a Bronica SQAi with a 120-format film back.

Black and white film used for the pictures above Fomapan 100 with the black backing paper. They have recently changed the paper to the same one Ilford use. you can see what the different backing papers look like here



   





  
 

Sunday, 5 September 2021

Bronica battery trouble.

I really enjoy using my SQAi But recently its reliability has become unpredictable to the extent that I have seriously thought about getting rid of it.


I know what the problem is, it is to do with the silver oxide batteries and the way they make contact or not with the contacts in the camera. On occasions a film has built up insulating the batteries from the camera contacts. A quick scrape and all is well again. Recently this has gotten out of hand in such away that I'm no longer sure if the shutter will fire from one frame to the next even after checking that the contacts are clean.

I've concluded it is one of three things: the batteries are not up to the job, bad manufacture, or that something in the camera has worked loose? Or maybe all three. I am so fed up with it so much so that I have dug out my motor drive for the Bronica - something I have not used in years. I have also bunged on the eye level prism, which corrects the backward view you get from the flip up viewfinder. I did this because it makes the use of the camera more seamless.

A drastic move I know as Bronica did not produce an auxiliary battery pack for its cameras like others have. It adds weight that I'm not happy about but if it makes the camera more reliable then all to the good.


I can not believe how much these changes have reinvigorated my image making. It is akin to when I first purchased the camera. It works every time freeing me up from that nagging 'will it?' or 'wont it?'. It was satisfying to hear the clump of the shutter with the outlandish sound of the motor as it wound on. No more senior moments. With the addition of all this technical wizardry it has made it more enjoyable. If I had known this, I would have made the changes ages ago.

Has anyone else experienced this problem with their Bronica, if so how did you cure it?  

update 12/2018

I thought I would update this post by saying that the motordrive I fitted a couple of years ago has dealt with the battery problem. It does this by taking on all the power requirements of the camera. 


Update 5/9/21

Further to the battery problem noted above I have now put a bit of card in the battery box to force a better connection. It has work well but the build up on the contacts needs an eye kept on it. As it can go back to it's old ways. It is also a good idea to sand the negative side of the battery it gives a better contact.

If you use the motor drive without the silver oxide batteries fitted the light meter view finder will not work as it takes its power from them only.