Wet side of the darkroom.

On this side of the room you will have laid out your developing dishes in the following order: developer, stop-bath, fix, print washer and/or sink. These may have heaters under them or you can have a slotty laid out in the same way. Obviously this will take up less space.

Typical wet side layout

This is where you keep your chemicals, it is also the place that the solutions are poured out and back into their storage containers. The height of this table needs to be right so you can work comfortably in the standing position. It is a good idea to store these chemicals under the table if there is a leak it will go on the floor and not drip into your working dishes ruining your prints. For safety reasons it is not a good idea to lean over your dishes to retrieve items from shelves above while your working as you may knock the contents of the dishes over yourself.

Remember that these chemicals need to be treated with care and you should follow the safety advice recommended by the manufacturer.

Safety in the darkroom

There are some health and safety issues in the darkroom. The most commonly used chemicals are no more dangerous than household detergents and bleaches, some of the more specialized chemicals can be hazardous. Here are some do's and don'ts to make things safer.

Do's

• Wear gloves ( rubber or Latex), protective cloths and use eye protection.
• Wash spillage's to skin and eyes quickly with lots of water.
• Keep a tap hose for this purpose'
• Clearly label everything.
• Make sure there is good ventilation.
• Dispose of solutions safely' seek advice if needed.
• Mix chemicals slowly and in the right sequence.
• Filter water and home-made solutions to remove bits especially for film processing.
• KEEP ALL CHEMICALS OUT OF THE REACH OF CHILDREN.

Don'ts

• Eat, drink or smoke when mixing chemicals.
• Inhale dust from powders.
• Fail to read instructions and warnings first.
• Use kitchen scales for chemicals.
• Use metal containers, mixers and trays.
• Add chemicals together without knowing if the outcome is safe.
• Add water to strong acids or alkali's ( e.g. caustic soda-Na OH). Always add them to water not the other way round and slowly.
• keep large glass bottles on high shelves.