Pages

Saturday 22 March 2014

Dogs Dinner.

Well not quite, a dogs water bowl! There is no chance of it falling in his dinner because his head is in the bowl before it hits the floor. The film was more likely to become a chew.

I noticed that two film containers were sitting on the kitchen table. Thinking they were empty I picked them up to throw away, to discover that they were not. I opened one and out dropped a roll of exposed colour film. Butter fingers here managed to drop the roll of film! The consequence of these finger fumbling, was splash! straight into the dogs water bowl. My wife said that she had not seen me move that fast since my superman days. I need reminding, what superman days?

After a bit of dancing around to shake the water out, it was off to the local supermarket for development. An outlet we had not tried before. The film was also long out of date - nearly a decade. If it had not been for the fact I was on my way out I would have blacked out the darkroom and removed the film for drying. These things always happen when you're short of time.

As it turns out the water had destroyed nearly half the frames on a film of twenty four. The up shot of this was we only had to pay half the normal fee. There was also colour shift on some of the prints. This I put down to the water damage.


Am I disappointed? No! Not really, but I am with myself for the butter fingers, but not with the results we have, as neither of us could remember who, what, when or which camera was used in the first place. The big disappointment is with the quality of the processing and paper used. 

Monday 10 March 2014

A mistake comes good

Developed normally
In a recent chat I had with another photographer, there was a lamenting the fact that he had not noticed a problem with his new pinhole camera; well not the camera but a bit of kit he was using with it. He is not the only one not to notice the little tell tail signs that things are not going well. I had the same sort of thing with the lith 200 process I was trying out for the first time. It was not until I started to use different makes of paper that the fault struck me. Up to that point I thought it was part of the process. It turned out that the box of Kentmere paper had been light contaminated (fogged),but when I could not remember.  At this realization two things crossed my mind, what a waste of a box of paper and dam! it is not a peculiarity of the process.

lith 200 Kentmere paper
I changed to a different paper and continued to produce prints. Using the
negatives I had selected for the trial with the lith 200. While I was doing this I had the idea that maybe the fogged paper could be used to creative affect. I chose some of the negs that may lend themselves to this and processed them accordingly. As the first result appeared in the developer, I started to question this creative wisdom as it looked rubbish, but then my perception changed when the photograph of the bottles on the window sill appeared. It did not look out of place, in fact it added to it a sort of early twentieth century feel. Maybe my idea wasn't such a bad one after all!.


lith 200 Forma paper
What I'm getting at is just because it has gone wrong there is no need to throw the baby out with the water so to speak! With a little lateral thinking creatively you can turn things round. Some of you may think I'm talking a load of rubbish ( I'm being polite) but it is surprising how often a mistake can come good.
lith 200 Kentmere paper




Saturday 15 February 2014

The most popular posts of 2013.

William Henry fox Talbot 

These are the ten most popular posts on this site for 2013. In some cases not the best written but then who sets out to write a bad article. I compare it to making pictures, I go out with the intention of producing my best work. I chose those pictures that meet that criterion and share them with you. Then the choice is yours and that means you may not agree.

Of the hundred and fifty or so posts on the blog the following are the most visited making them the most popular.


  1. Fox Talbot a short history.
  2. Darkroom layout.
  3. Preparing the pinhole camera for use.
  4. Basic split grade printing.
  5. Choosing an enlarger.
  6. Print washing.
  7. Test results for Agfa APX 100.
  8. Fuji GW 690111 overview/review.
  9. Dryside of the darkroom.
  10. Keeping your negatives safe.


Monday 10 February 2014

Easy Lith 200 Results.

This is my follow on post explaining what happened and how it was done. Not everything went according to plan, but more about that later.

Being in a fortunate position of owning a second slot processor I decided to set this at 26 degrees for the lith developer. I did not add stop or fix to the other slots but continued to use what was already available in the other slotty, keeping the temperature to 20 degrees. It is just as well I did as one of the papers emulsion became very soft.

I chose high contrast negatives that I had already printed. I looked back through my notes on how long each was exposed for and added one and half times more exposure to see how things worked. I chose to follow the instructions when it came to diluting part A and B at 2X 1+25+1000 mls water. (20 mls of each 40 mls in total in 1000 mls of water). The paper I chose to start with was Kentmere RC because it was the paper originally used with these negatives. All the prints were exposed to white light, no grades were set. I had no idea how they would turn out or what sort of tone would be produced. I used two other varitone RC papers to see which produced the best results with this mix of A and B.

Kentmere paper
This is the original Kentmere print exposed at grade zero and developed as normal.

Kentmere paper
This is the first print out of the easy lith on Kentmere paper. It took over three minutes for it to reach full development. A very faint out line of the picture started to show about 30-40 seconds in. It was difficult to see whether the print had toned or not with the red light on.

Foma 131 paper
Second print was on Foma 131 varitone. This took a full twelve minutes to develop fully and is what I had in mind as a lith look.

Ilford paper
Third print was on Ilford multigrade paper, I pulled the paper early because I thought it may go completely black.

Conclusions:

Not knowing what to expect from this process makes it difficult to be to critical with the results. One of my main mistakes was to treat this like a normal developer, I should have mixed the two parts separately so I could vary the strengths of each part to get a look that was in my opinion more lith like, this may have lead me to make changes to the amount of over exposure as well. The problem I think in these early stages of getting to grips with a new process such as this is there are a lot of variables to take into account. With more practice I suspect I will arrive at something more my taste.

A side affect of using the Lith process has shown up a weakness in what I considered a well vented darkroom. This is the first time I experienced a build up of fumes. Some updating needs to be carried out if I wish to continue printing using lith chemicals. After a bit of thought I feel it should be upgraded regardless!

Over all I am pleased with the outcome, for a first attempt. Others may not, but I would prefer to get as many of the mistakes out of the way now so I can concentrate on producing finer prints in the future.

Link back to first post easy lith 200