Friday, 6 April 2012

Silverproof paper

This is the second run of budget priced paper marketed by Silverprint and has a matt finish. The first run was gloss. I have used the later and was impressed with the photographs it produced. With its grades being limited to two I was not put off.

Ilford FP4+,120 fromat 6x6 negative, Developed
in PMK Pyro and printed on
Silverproof paper Matt.
I originally purchased the gloss paper for contact prints and didn't really take much notice of how well they were being produced until I obtained a 12 x 16 slottie (Nova paper processor. which was the dirtiest bit of kit I have ever purchased second hand, a story for another post). The silver proof paper was the largest sized paper I had on the shelf and I was  impatient to see how well this new piece of kit worked. I was surprised by the tonality of the paper which lead me to make a series of photographs. It is a shame it was a limited retail run. It will missed.

Then a second batch was announced on Matt paper, which is a finish I'm not a fan of, but I'm always happy to try something new. This will also be a limited retail run, so if matt is your preference get some boxes in while you can.
Ilford FP4+ 120 Format 6x6 negative, Developed
in PMK Pyro and Printed on
Silverproof paper Matt.
The paper is completely different from what I'm used to. It is difficult to tell which is the emulsion side in the darkroom but with a little practice, the back has a slight  fibre feel to it which takes a time to get the hang of. First impressions are good, the photographs remind me of the cover page to Black and White Photography magazine in the way it looks and feels but has a depth to it that ink cannot replicate. It also does not have that richness of tone you get with gloss papers. Having said that, I like the difference and  expressiveness  it gives to the pictures it produces.   

Ilford FP4+ 120 format 6x6 negative, Developed
in PMK Pyro and printed on
Slverproof Paper Matt.
The pictures that complement this post were developed in a warm tone developer from Ilford with the enlarger set at grade two, initially it was set  at  grade three but I found that the pictures had to much contrast. On hindsight it may have been better to use an un-toned developer, but then I was not planing to use the proof paper for a full print session. I got carried away after the first test prints and I'm pleased I did.

No comments:

Post a comment