Washing your negatives

This is just as important as the developing, stop bath and fixer. The temperature of the water needs to be close to that of the previous process of 20 degree C.

The purpose of washing is to remove the last of the fixer from the emulsion and needs to be done thoroughly to ensure the longevity of the negatives.

Which method to use? One way is to empty the tank and refill with fresh water and agitate for a few seconds, this should be repeated several times. Another way is to use a wash hose that is specially made to fit into the top of the developing tank and attached to the tap. I personally favor this approach with my own refinements: after fitting the hose in place I open the tap till it is nearly fully open and leave for thirty seconds, this vigorusly removes the last of the fix that remains. Then slow the flow right down for the next ten to fifteen minutes. It is a simple straight forward procedure that has served me well over the years.

The Thermometer.

This is one of the most important pieces of kit in the darkroom. As already mentioned temperature is one of the main controlling factors in the processing of your films and prints. It is important that you have good quality thermometers that are graduated to at least half a degree but a quarter of a degree is better and one that has a thicker line at the vital 20 degrees C. It is a good idea to have a thermometer for each of the chemicals you use in the processing of your films and prints as it will stop cross contamination.Also there will be no hold ups if you break one. It is recommended that you keep to one type, preferably alcohol as it is safer than mercury. If a mercury thermometer breaks it will contaminate the chemicals it comes into contact with and fog any prints that are being processed at the time.