Pages

Showing posts with label magnifiaction. Show all posts
Showing posts with label magnifiaction. Show all posts

Friday, 27 January 2012

Enlarging len which aperture?


The quality of your enlarging lens will lead to better and sharper results at greater magnification. The aperture ( low number = large opening, high number = small opening) you set not only affects the amount of light it lets through but the depth of field as well. A good average aperture is F/5.6 in most cases. If the exposure times are to short a larger F number is needed, this will give you a chance to hold back shadow areas that may become to dark to show any detail. But don't get carried away and close down the lens by too  many F numbers as this may over heat the negative causing it to buckle, making the picture loose sharpness.

Saturday, 31 December 2011

Magnification on your enlarger


This is going to get a bit technical, so bear with me! This is the ratio between the print and the negative. It is calculated using the linear rule. To make things easy, lets say we are going to enlarge a thirty-five mm negative (24 x 36 mm) by a factor of ten this will give us a print size of 240 x 360 millimeters ( about 9" x 14") in size.
Magnification is related to the distance the negative is from the enlarging lens and the lens from the baseboard. So as the latter distance increases the former decreases. In other words the higher the enlarging head is from the baseboard the closer the lens gets to the negative when it is being focused and vice versa. It stands to reason that the larger the print the longer the exposure time will need to be. There will also need to be a change in paper grade to a harder one as there is a softening in the contrast.