Pages

Showing posts with label prints darkroom. Show all posts
Showing posts with label prints darkroom. Show all posts

Thursday, 23 December 2021

Cold tone paper by Ilford with a touch of blue tone developer


When I order new materials for the darkroom I always add something I have not tried before. It can be anything but this time it just so happens it was a box of Ilfords new cooltone FB paper. I was interested to know what their definition of cool was. In my mind it means rich blacks and blueish tones in a very subtle way.



It has taken I bit of time to choose a set of negatives that would give this paper a good workout. Sometime ago I was fortunate to visit the thirty meter high Clydesdale horses heads known as the Kelpies at Falkirk. They are a wondrous sight to see glistening in the landscape. Even more so on the bright cloudless day I visited. Their stainless steel 'coats' sparkled in the sun as you walk round them, making it difficult to look at them without sun glasses. Trying to make photographs that are different is impossible as hundreds of people walk and stand around them taking pictures from every possible angle. It's a snappers paradise! But then every ones experience of these equine giants is different and so are the pictures made.


 
I used my Bronica 120 6x6 camera to make the pictures I had in mind. Which turned out to be about a dozen frames across two rolls of film. I am not prolific at the best of times but even I was surprised by how few images I had captured.

Armed with two pages of negatives I picked three frames to try this paper out on. I would start by developing the first picture in Ilfords own multigrade print developer this would be the standard to judge the others against. I will also be using my favourite cooltone developer as well.


It is not until you have the photograph in the day light that you can see what the tint of the paper is. It has a very bright white tint to the paper, making the blacks very crisp, but it still has a very subtle warmth to it when compared to Moersch 6 blue tone developer. I know I favour the cold working developer but I also like Ilford rendition of the horses nose, they each have there own character. 

Overall I am very pleased with the way the images have turned out. This paper appears to have a grade more contrast, I think this is due to the very white base colour of the paper compared to the neutral tone paper I am used to. It works well with my favourite blue tone developer. I will have to see if the blue is richer with this paper than others.


Technical data:

Top photograph of the horses head developed in Ilford multigade.

The next one in  Moersch 6 blue.

 

 

 







Sunday, 7 October 2012

Paper fixing faults.


This post will be short, a sort of quick guide to paper fixing faults. They are listed in no particular order.
This picture shows the fix is exhausted

         Brownish areas: fix exhausted.
 
         Print becomes yellow after a while: Was not fixed for long enough and    or  washed for to short a time.
 
         Burnt out highlights: acid fix not diluted to the right strength. Left in the fix for to long. Not timed properly.
 
         Brownish spots, Lilac round the edges: Stop bath exhausted, incomplete fixing, forgotten to wash or use stop after the developer.
 
The blue stain shows that the stop is exhausted.
         Yellowish fog over the entire paper surface: Exhausted fix, developer contaminated fix, little or no agitation while fixing.

 

It is not unusual to be caught out by some of these faults. Even when you have years of experience.