Bergger Pancro 400 a delightful surprise

 

I am writing this from the darkroom as I process the second roll of Bergger Pancro 400. It is being developed in Kodak HC 110 for 9 minutes I'm not sure how it is going to turn out as I forgot to soak it for a minute in clean water. I knew something was a miss. It is becoming a joke, nearly every film processed this year, has had a fault one way or another. I will be pleased to get back to the mundane predictability of old. In more ways than one.

Now with the film hanging up to dry I can get back to what I wanted to write. I'm pleased to say that the initial look over the negatives is good in comparison to one I did correctly. I will only know for sure when I start printing.

As you may have already gathered the film needs to be soaked for a minute before the developer go's in. When you pour the water out it has a very slight colour to it. Stop bath is as normal for those that use it but you must fix the film for six mins or longer depending on how old your fix is. Agitation for the developer is for the first 30 seconds (twelve inversions) and then for 5 sec's every 30seconds  ( two inversions.) If you tumble your tank instead of twiddling. When you open the top to pour away the developer there will be bubbles in the top so far I have not noticed any problem with the look of the negatives. 

The lock down has found me time to slow down and consider what I should do. While I mulled things over I did a bit of surfing those were the days now it is just the net for information on macro photography. It became clear that it would be best to use a fast film because of the drop off in light reaching the film plane when using a bellows. I'm in trouble I have no 400 ISO film in 120 while I was surfing down the pipe I came across references to film called Bergger. It did not take long before the screen was swamped with peoples opinion on this film. I scratched the surface to see what was said and looked at the pictures it produced. I was disappointed to find that most of it was scanned negative. One video I watch stated the negatives were flat. I'm pleased I took no notice as the results I have hanging up to dry show otherwise.

I have long held the view that one favourite film developer at a certain dilution should not be a catch all for all makes of film and that a comfort zone is the enemy of creativity and missed opportunity. Manufactures go to great lengths to produce a developer that best brings out the qualities of their film and as I have discovered Bergger is no different only in this case their film has a twin layer of emulsion giving it its full light sensitivity hence the name Pancro. Which would suggest a look all of its own. A comparison of their developer could be on the cards?

For instance I chose to use HC 110 to develop the film, it could quite easily have been Rodinal or one of the half dozen others I have on the shelf but had in mind the fine grain qualities of HC 110. Fast films are not known for there fine grain unless it is a T grain. I should add that the developer you choose has a big influence on the size of grain and the character of the negative and therefore should be given due consideration.

When doing something like this the first time it is a leap of faith that all the information about development is correct. I have found that the time suggested for HC 110 produces a negative that is a little on the thin side for me. It has shown its self in the darkroom with shorter than my usual exposure times. I may increase the development time but for now I'm going to let it stand until I have processed a few more rolls.  

I have exposed a number of rolls of Pancro 400 at box speed. Most of it in high contrast conditions. In some cases with the lens closed down to F 32 at 500^th of sec. it has managed to capture a wide range of detail from darkest to brightest. All waiting for you to utilize when exposing it to your chosen paper if you wish. I have found printing these negatives to be some of the easiest. The whites are brilliant and detailed to a degree I have not noticed before with other film. The blacks are rich and pure but can also be very detailed. 

One note of caution it is quite easy to over expose the paper due to the extra tone and crisp detail. I have discovered that I am trying to have it all leading to overly dark and sometimes muddy photographs. With the saying less is more in mind it has lead to some wonderful photographs that are a joy to behold.

You should give Bergger Pancro 400 a go if you have not already done so and print it in the darkroom. Scanning does not do it justice.

A note of caution when using out dated 120 film it can become very grainy even with HC110 when pre soaking, I suggest not doing so to reduce the look of grain.

Technical Data:

All black and white images have been scanned from prints. Contact printed on Ilford MG 5 RC G. Key printed on Kentmere RC G, Containers of fruit printed on Ilford  MG FB, All developed in multigrade. 

The picture of the graduate is used HC 110.    

Cold tone paper by Ilford with a touch of blue tone developer

When I order new materials for the darkroom I always add something I have not tried before. It can be anything but this time it just so happens it was a box of Ilfords new cooltone FB paper. I was interested to know what their definition of cool was. In my mind it means rich blacks and blueish tones in a very subtle way.

It has taken I bit of time to choose a set of negatives that would give this paper a good workout. Sometime ago I was fortunate to visit the thirty meter high Clydesdale horses heads known as the Kelpies at Falkirk. They are a wondrous sight to see glistening in the landscape. Even more so on the bright cloudless day I visited. Their stainless steel 'coats' sparkled in the sun as you walk round them, making it difficult to look at them without sun glasses. Trying to make photographs that are different is impossible as hundreds of people walk and stand around them taking pictures from every possible angle. It's a snappers paradise! But then every ones experience of these equine giants is different and so are the pictures made.

 I used my Bronica 120 6x6 camera to make the pictures I had in mind. Which turned out to be about a dozen frames across two rolls of film. I am not prolific at the best of times but even I was surprised by how few images I had captured.

Armed with two pages of negatives I picked three frames to try this paper out on. I would start by developing the first picture in Ilfords own multigrade print developer this would be the standard to judge the others against. I will also be using my favourite cooltone developer as well.

It is not until you have the photograph in the day light that you can see what the tint of the paper is. It has a very bright white tint to the paper, making the blacks very crisp, but it still has a very subtle warmth to it when compared to Moersch 6 blue tone developer. I know I favour the cold working developer but I also like Ilford rendition of the horses nose, they each have there own character. 

Overall I am very pleased with the way the images have turned out. This paper appears to have a grade more contrast, I think this is due to the very white base colour of the paper compared to the neutral tone paper I am used to. It works well with my favourite blue tone developer. I will have to see if the blue is richer with this paper than others.

Technical data:

Top photograph of the horses head developed in Ilford multigade.

The next one in  Moersch 6 blue.

 

 

 

T max 400 a wonderfully smooth finish.

Whilst putting an order in and perusing a suppliers web site I suddenly had this urge to find out what the cost of using Kodak's T Max 400 would be in 120 format. I have no idea where this thought came from or why! Anyway I had a look and by chance it was out of stock. I still do not understand why I should want to use it. In the main I have not used film faster than 200 ISO for decades. I have been happy to go about my picture making at 100 or 125 ISO.

Some months later out of the blue I find myself buying ten rolls of 120 out of date Tmax 400 which just so happened to be part of a job lot. If I'm honest I would not have purchased them at all if it had not been for the Tmax. All I can gather is my creative subconscious has an idea of some sort that will reveal it's self over time!

I am no expert in the way the mind works but I get a sense of when it is the right time to get things done. I sometimes find myself sitting back waiting for that feeling to get on with projects, when it happens I find I am very creative for a short intense period of time. Once that need to be creative is fulfilled the project has to be more or less complete, which happened in this case with the images that accompany this article.

We had a pile of logs in the garden waiting for me to chop up when I had the time. They were starting to nag at me to get on with the job when I noticed the way a particular branch was lit - it brought out the texture of the wood in an interesting way. For some reason it also made me think of a severed arm the more I explored the pile of wood the more macabre it became to the point where another branch looked like a limbless torso. My god! my mind has gone into overdrive and it was not Halloween! It just goes to show how powerful your imagination can be - I could no longer bring myself to cut the wood up! 

Some weeks later I was looking out the window at the logs again - I know! But what struck me was the quality of the light. It was very bright in a soft way as though some one had put a soft box in front of the sun. I went out to look at the sky it was covered with very thin cloud, like a mist. All at once the idea for making images of the logs fell into place.

To make the images as surreal as possible I had to separate them from the landscape, which meant I had to set up a background in this case - I felt that white would do the best job. I worked as quickly as I could because I was not sure how long this wonderful soft light would last. I had no time to test the white background idea just go with the flow. The lumps of wood were very large and heavy for a set of still life images.

T Max 400 grain, film developed in RO9.

 As to what film I should use there were no second thoughts - the out of date T Max 400. I pulled a number of rolls out of the cupboard before I loaded them into my Bronica SQAi. I used my hand held light meter to check how bright it was. The rest as they say is history.

The light lasted the best part of the morning and a number of rolls of Tmax. Which was fortunate I was in a creative wonderland that stopped abruptly after about a couple of hours. The flow of ideas had gone so it was time to pack up and move on. The intensity of the project had left me worn out! The images do not convey the size and weight of the logs I had been moving around. It was time to sit down, regain my energy over a cup of tea and consider how they would be printed.

I was excited and apprehensive all at the same time. Excited to see how the negatives and prints turned out but also apprehensive at the possibility that the light readings could be wrong as there was not time to double check so the film could be empty of images. My other concern was with the development of the film. I had a time of 10 minutes at 1+50 for the RO9 I would be using. Having not used this film developer combination before I could not tell how well they would come out until the wet negatives were hanging up to dry. In these situations I process the film one at a time so I can adjust development if needs be.

I was shocked in a pleasant way when I first looked at the dripping negs. The detail and tone were superb. The superlatives kept coming as the printing got under way. The negatives have a super fine grain with great tone and detail. I printed them on Kentmere RC gloss paper because of the arctic white tint which tends to increase the contrast of the negatives. I would have used FB paper but I did not have any cool tone paper in stock so used the next best thing. I needed the bright white background to enhance the surreal look, not that they weren't that already.

It became clear that if I wanted to keep the stark white background then there would need to be some burning in of the light wooded areas to bring out the detail and maintain the softness to the shadow. It would have been criminal not to exploit all the fine details the negatives held. This extra work did not take away the Eminence pleasure it was to make these prints - even the ones that went wrong - believe me I make some stupid mistakes sometimes that I can't believe!

I really did not know what to expect from the T max 400 especially as I was using RO9 ( it depends on which manufacturer you use as some are finer working than others) not known for it's fine grain and less so with film as fast as 400 ISO. The grain produced is quite fine considering the developer used I suspect it would be even smoother with a developer noted for it. These T grain films really are a jump on from the more traditional emulsions. Is it better than Delta? it is difficult to say without doing a straight comparison between the two. I'm exceptionally pleased with the results.

Oh by the way the pile of logs are still there! Thanks to a friend the pile has grown in size and weight and will take even longer to chop up!

FB papers developed in Tetenal new Eukobrom AC.

Four papers side by side.

There is not a great deal I can add to what I have already written about Eukobrom AC. I was not expecting to show you a set of FB prints so soon after my first use of this new developer. The questions I still have need a good amount of time to pass.

A partial answer to one question is that the developer will keep for at least three days after dilution. As long as it is bottled at the end of each session when being used in a tray. A litre of 1+9 strength so far has produced twenty images of mixed sizes. According to Tetenal you should get about 1,353 prints of 30 x 24 cm out of each 250 ml of concentrated developer. Which works out at about 54 prints per 100 ml diluted at 1+9. Obviously in practice this will vary depending on dilution, paper and conditions of use.

While I was developing the FB images I did notice that different    papers could take up to sixty seconds before they started to show any signs that the paper had been exposed and a further sixty to complete the process. Knowing when the increase in images appearance is down to reduced developer activity will take time to discover.

Ilford cooltone fibre base paper

I chose three makes of FB paper: Ilford cooltone, warmtone and natural - all gloss, Fomatone MG classic chamois 542 mat and Adox MCC gloss. All the papers were exposed at grade three but unlike their RC brothers the exposure time had to be adjusted as some of the papers required a lot less light. Again the tones had good separation, rich blacks and clear whites.

Of the three Ilford papers the natural paper took on a cool tone, where as the cooltone took on a warmish tone. This could be the first indication that the developer is depleting. If this is the case then it is exhibiting the same traits as those traditionally produced. The slight colour change indicating that the silver has not been fully developed. I have written about the changes of colour you can expect from exhausting developer in another article.

 

Fomaspeed 524 matt warmtone.

When it come to pushing or pulling the print (This is where you over expose the paper then pull it from the developer when it has reached full development before the suggested time for full development.) I have so far kept to standard use.

Adox MCC fibre paper

If you have not tried it yet give it a try. If you have used it let us know - always interested in what others think.  

         Link to previous post on this developer.