Dry side of the darkroom.

Typical layout for dry side of darkroom

This is the area where you will have your enlarger set up. The table will need to be large enough to allow for timer, puffer (like a rocket air) and magnifying glass. There will also need to be space for you to lay out your negatives, printing paper, scissors and or guillotine/rotary trimmer and holding back and burning in tools. It is a good idea if this area also has cupboards and draws for keeping your paper and equipment in.

Darkroom layout



When setting out your darkroom it is best to set your work flow from left to right. By doing so you are less likely to contaminate the dry side with chemicals or water. You should keep the enlarger table separate from the development table. The dry side takes up less space than the wet side so can be put along a shorter wall. The support for the enlarger should be completely stable and set at a comfortable working level when standing. For a standing position the right height is 95cm (37").

A typical lay out

Remember electricity and water don't mix so take particular care when providing power for your equipment. If in doubt consult an electrician. It is not imperative that your darkroom has running water but ventilation is and will need a light proof grate.

This may sound strange but make sure that the illumination is sufficient to allow you to see round the room when printing.