Trouble loading a plastic spiral.

The plastic Paterson type of spool can be difficult to load. A common problem is the little metal balls that grip the film get stuck. Dont try to force the film through, if you do it will kink the negative leaving a half-moon shape. It can make the frame(s) useless. You will need to part the spiral and start again. A pain I know! Be gentle when removing the film, there is a chance of damage.

Damp or wet spool will not load, so make sure it is completely dry before use. Sweaty, damp or sticky fingers will make it difficult as well.

A too tightly rolled up 35mm film in its cassette can take a set that makes it tricky to load. So when rewinding the film back into the case dont over wind it after you hear it has released itself from the camera spool. With practice it is possible to leave a little bit of the leader poking out.

Types of Enlarger Negative carriers

There are two main types of negative carrier, with and without glass. There are arguments for and against each type. Lets be honest there are three types, the adjustable.

Glass-less carriers avoid the Newton rings effect (a post for a later date) but also have the disadvantage of allowing the negative to buckle when they warm up, this is more pronounced with 6x6 negatives. To minimize this you should be very careful when focusing and use a smaller aperture to increase the sharpness across the negative.

Another disadvantage of a glass carrier is dust; to be honest it is not the big deal that everyone makes it out to be. It is just a case of being methodical in your approach. The main advantage of glass carriers is that they keep the negative flat. Another plus is that you can experiment with unusual effects by using various materials such as flower petals, salt crystals and soap suds etc in the carrier.

There are adjustable carriers also, which are very handy as they allow you to mask out badly illuminated edges without having to increase the magnification, or you can adjust them to include the rebate of the negative.