Be noticed

How often do you review your images before you edit and or print them? There is a well kept secret among film photographers. The photo board or should I say the noticeboard - and yes they do get noticed.

On it I put all my new contact sheets and recently printed images. It is placed across the room from my computer and put there on purpose, allowing me to view the sheets and prints often, in those moments where I need a break from looking at the screen. It is a good reviver and helps to formulate how and which images to print. So when I take the negatives into the darkroom, things run more smoothly. 

I test whether or not the way it is printed and the paper used is right by putting the photograph on the board. Leaving it there for about three weeks or more. It also gives the print time to mature especially if I have used an FB paper. I have found that some of the fainter details show themselves when the print completely dries out. Along with any spotting that maybe needed. If at the end of this time I'm not compelled to reprint it. It becomes a print I'm happy to reproduce for sale.

I also use the noticeboard for editing sets of prints. This is a collaborative thing where anyone can move the order about or remove an image if they do not think it works. When this happens a discussion about the way the story should be told ensues, this a great way of getting the run of the pictures right.

Out for a stroll with the Zero

It is always a joy to be out with the Pinhole camera. But it must be a strange sight to behold as I walk up the street. A little brown box attached to what could be construed as a big black stick (tripod). On this occasion it was a lovely bright day with a biting cold wind; I had not appreciated just how cold it was until I had been standing about making the first image.

As I strolled around the local lakes I took warmth from the brilliant sunshine and the anticipation of some interesting image making. By the time I was half a dozen pictures in I had forgotten how cold I was. I think the cold must have gotten to me as I could not remember what the reciprocity factor should be. Times 2 up five seconds and times 5 from then on. Dam and I had left my note book behind with the reminders in. Oh well I'm not going back.

from T max negative

This walk is turning to a bit of a jokers holiday which had started before I had even left the house. My Zero is a multi format camera Just before I loaded the film I checked to see where the dividers were and in my mind it was set to 6x6 I loaded the film and used the centre red window to view the frame count. I should explain there are three for the different sizes of negative. Later that day I had the chance to develop the film only to find it was set to 6 x 4.5 – ehh! Fortunately the second film was only part way through so rectified it by using the top window for the next days images.

The wind was that strong it was producing lots of fine ripples across the water. I was not quit sure how this would look in the final images not having made many photos of water with this camera. It just go's to show how cold it was, on the eastern side of the lake I found a lot of glass thick ice being smashed up on the shore. This brought back how cold I was feeling. Time to get back, to a home made slow cooked beef Currie that should be bubbling away by now.

Contact print at 2 seconds
the print is
also showing signs
of exhausted fix. 

Just before I left the house the following day I filled my pocket with a mix of film from different manufacturers; I do not usually do this but so what! it was an off the cuff decision to go out picture making so why not mix it up completely! The previous day I had already loaded Kodak's T Max 400 which I thought might be a bit of a gamble seeing how bright it was, just as well I did, as I messed up the exposure completely. On subsequent trips I loaded Ilford's delta 100 and Fomapan 100 which is my fav film for the Zero. The others were first time use and this time I got the exposure right.

How badly the T Max was exposed showed it self when I contact printed the negatives. I had to re do it at 5 sec's instead of my usual 2, enlarging lens fully open with white light (with no grade filters set). The negatives when looked at showed full detail. The contact print indicated that the enlargement were going to need long exposures and a lot of dodging to get them the way I wanted.

From Fomapan 100 negative

I have developed all my negatives in Adox version of Rodinal. I use 1+50 for the time required. I have to keep reminding myself that this developer has a high acutance and therefore a lot more contrast. In some cases overly so. I had in mind to use Kentmere RC gloss but changed to Footspeed's RC gloss that has a more normal look. If I had kept to the original route they would have had super contrast. As it was, I had to drop the filtration for printing down to 0 from my normal grade 3 . With the contrast sorted it was time for the exposures. With the segmented test print in the holding tray the fun really started. As an example one print had a base exposure of twenty seconds but then needed an extra 40 seconds on top of that for the sky and some of the lake. Others longer.

From Ilford delta 100 negative.

I had a good time in the darkroom even though the printing sessions were challenging the prints came out a lot better than expected. They have a lot of atmosphere to them that I'm really pleased about. Some of the photographs show that there is ice on the lake in places. I was not sure if that would show up but it has in a couple of the images.

Kiroku by Dadio Moriyama.

I was flicking through some book reviews, when I came across one about Daido Moriyama's new book 'Record' known as Kiroku in Japanese. It is the collection of the first 30 issues of his personal magazine dating back to 1970s. Basically it chronicles his image making and some thoughts over the time period.

After reading the revue I had an irresistible feeling that I should obtain a copy. Although I am interested in Japanese photography I cannot say I know anything about Moriyama's work apart from he is a street photographer, which has a strong appeal.

 With a copy of Record in my hand and weight being the measure of quality, this is in the five star category. When you slide the book out of it's slip case you are presented with black edged pages and flush black edge hard cover something I have not seen before. This in itself brings a drama to what is to follow. 

When you open the book you are presented with silky smooth gloss white pages that keeps you in suspense as Mark Holborn introduces you to Daido Moriyama and sets the stage for the images to come. 

Wow! And what a shock they are! pulling no punches in their very high contrast look making full use of the term black and white. It takes time for your eyes to adjust to the rich black, making it difficult to see what the images are about. This is partly because these images are made on film at night without the use of flash making them very grainy. This graininess has been translated to the gloss pages by the printing technique making the pages gritty to the touch and adding a textural impact to the pictures.

He does not just use monochrome film there are some magazines in colour where he plays with the vibrancy of the colour. 

For a book that I decided to obtain on a whim, I have been very impressed by the images within. Yes the blackness, odd angles and graininess of the images are an assault on your sensibility's but that is what makes his work different.

It is a book to be enjoyed at leisure over many days and not all at once.

T max 400 a wonderfully smooth finish.

Whilst putting an order in and perusing a suppliers web site I suddenly had this urge to find out what the cost of using Kodak's T Max 400 would be in 120 format. I have no idea where this thought came from or why! Anyway I had a look and by chance it was out of stock. I still do not understand why I should want to use it. In the main I have not used film faster than 200 ISO for decades. I have been happy to go about my picture making at 100 or 125 ISO.

Some months later out of the blue I find myself buying ten rolls of 120 out of date Tmax 400 which just so happened to be part of a job lot. If I'm honest I would not have purchased them at all if it had not been for the Tmax. All I can gather is my creative subconscious has an idea of some sort that will reveal it's self over time!

I am no expert in the way the mind works but I get a sense of when it is the right time to get things done. I sometimes find myself sitting back waiting for that feeling to get on with projects, when it happens I find I am very creative for a short intense period of time. Once that need to be creative is fulfilled the project has to be more or less complete, which happened in this case with the images that accompany this article.

We had a pile of logs in the garden waiting for me to chop up when I had the time. They were starting to nag at me to get on with the job when I noticed the way a particular branch was lit - it brought out the texture of the wood in an interesting way. For some reason it also made me think of a severed arm the more I explored the pile of wood the more macabre it became to the point where another branch looked like a limbless torso. My god! my mind has gone into overdrive and it was not Halloween! It just goes to show how powerful your imagination can be - I could no longer bring myself to cut the wood up! 

Some weeks later I was looking out the window at the logs again - I know! But what struck me was the quality of the light. It was very bright in a soft way as though some one had put a soft box in front of the sun. I went out to look at the sky it was covered with very thin cloud, like a mist. All at once the idea for making images of the logs fell into place.

To make the images as surreal as possible I had to separate them from the landscape, which meant I had to set up a background in this case - I felt that white would do the best job. I worked as quickly as I could because I was not sure how long this wonderful soft light would last. I had no time to test the white background idea just go with the flow. The lumps of wood were very large and heavy for a set of still life images.

T Max 400 grain, film developed in RO9.

 As to what film I should use there were no second thoughts - the out of date T Max 400. I pulled a number of rolls out of the cupboard before I loaded them into my Bronica SQAi. I used my hand held light meter to check how bright it was. The rest as they say is history.

The light lasted the best part of the morning and a number of rolls of Tmax. Which was fortunate I was in a creative wonderland that stopped abruptly after about a couple of hours. The flow of ideas had gone so it was time to pack up and move on. The intensity of the project had left me worn out! The images do not convey the size and weight of the logs I had been moving around. It was time to sit down, regain my energy over a cup of tea and consider how they would be printed.

I was excited and apprehensive all at the same time. Excited to see how the negatives and prints turned out but also apprehensive at the possibility that the light readings could be wrong as there was not time to double check so the film could be empty of images. My other concern was with the development of the film. I had a time of 10 minutes at 1+50 for the RO9 I would be using. Having not used this film developer combination before I could not tell how well they would come out until the wet negatives were hanging up to dry. In these situations I process the film one at a time so I can adjust development if needs be.

I was shocked in a pleasant way when I first looked at the dripping negs. The detail and tone were superb. The superlatives kept coming as the printing got under way. The negatives have a super fine grain with great tone and detail. I printed them on Kentmere RC gloss paper because of the arctic white tint which tends to increase the contrast of the negatives. I would have used FB paper but I did not have any cool tone paper in stock so used the next best thing. I needed the bright white background to enhance the surreal look, not that they weren't that already.

It became clear that if I wanted to keep the stark white background then there would need to be some burning in of the light wooded areas to bring out the detail and maintain the softness to the shadow. It would have been criminal not to exploit all the fine details the negatives held. This extra work did not take away the Eminence pleasure it was to make these prints - even the ones that went wrong - believe me I make some stupid mistakes sometimes that I can't believe!

I really did not know what to expect from the T max 400 especially as I was using RO9 ( it depends on which manufacturer you use as some are finer working than others) not known for it's fine grain and less so with film as fast as 400 ISO. The grain produced is quite fine considering the developer used I suspect it would be even smoother with a developer noted for it. These T grain films really are a jump on from the more traditional emulsions. Is it better than Delta? it is difficult to say without doing a straight comparison between the two. I'm exceptionally pleased with the results.

Oh by the way the pile of logs are still there! Thanks to a friend the pile has grown in size and weight and will take even longer to chop up!

Newton's rings. Updated

This effect can happen when using medium format and larger negative carriers as they use glass to keep the negative flat. Most carriers today use a frosted piece of glass above the negative known as anti Newton glass. 

The rings occur in the areas where two clear smooth flat pieces of glass lie next to each other but do not quite touch. The interference happens because the light rays are refracted, this produces irregular shaped dark rings in the projected image. This will happen more readily if any of the surfaces are wet. You can get round this by using a paper mask with the negative in the carrier. This will block out the light in the places where there is a gap between the glass surfaces. You will need to check the projected image to see if they are still visible.

Is it normal?

A while a go I was reading one of Tim Clinch's articles, in it he suggested that If you were thinking about becoming a professional photographer you should read Annie Leibovitz at work as he considered it a must. This prompted me to re-read it. Being well written, it is easy going taking me no time at all to get through it. 

When Annie was young she was obsessed with making pictures so much so it was impossible for her to leave the house without a camera. Annie learned later in life that it was OK not to have a camera in front of her face all the time and that some images should remain untaken.

Annie Leibovitz started as a photo journalist progressing to commercial and magazine work. The latter requiring a different approach which she had trouble adapting to. This was because she liked the spontaneity of photo journalism's, capturing the moment rather than having to make up images to fulfill a brief.

One of the things that struck a cord with me was the way she used her medium format camera, she suggested it was unorthodox to hand hold and move about the way you use 35mm. I have always used my Bronica SQAi hand held in the way she mentioned. I have never considered it to be unusual. Thinking on it, my Bronica has been swung through the air unsupported from the first day I picked it up. It has been held at arms length above my head to make a picture over the heads of a crowd and out over the side of a bridge to look down on its side at arm length so I can frame the picture. It has been up mountains, round lakes, along coasts and beach's, through cities and on long walks across country. All without the sight of a tripod. Admittedly by the end of the day my arms feel like I have been weight lifting - more so since I fitted a motor-drive to get round a problem and added an eye level viewfinder. What I'm getting at is it is OK to read and take note of what others do but do not let it stop you thinking outside the box.

The Bronica maybe my favourite camera to make images with, but sometimes I long for days past when life was less weighty and the camera was a Nikon FM.

Fg1

Fg2

Technical  data:

Fg 1, FP4+ ISO 125, Developer ID11, Printed on Ilford Multigrade RC Gloss.

Fg 2, Out of Date Fujicolour, Edited in Photoshop elements.

Double grade printing.

From time to time I find it strange the way events come together! for instance, I was in the darkroom working on some prints that I could not get the sky to burn in properly. There was nothing unusual in me burning in the sky, most of the photographs I produce have had the skies enhanced in some way. But this time I could not get it the way I wanted it.

The strangeness in this case was that a few days before, I was reading a thread on my favourite forum about how to deal with whited out skies when printing. I took part giving an account of my method of dealing with it. One of the other contributors suggested split grade printing. But when he described the process it is more akin to double grade printing - this is where you use another grade to bring out part of the image that will not burn in at the grade you are using.

All the circled images needed double grade printing.

The process:

The contact print in this case suggested that the stone work of the building and sky were under exposed when compared to the reflection. The segmented test print (grade 2) proved this by indicating that it may need to be burned in for an extra twenty seconds above base exposure of thirty seven seconds. Even with the extra light it did not make the difference. After a further print and forty seconds burn in, it still was not right. I decided to see if changing to a harder grade when burning in would make the difference.

With the discussion still fresh in my mind I opted to use the double grade method to see if it would solve the problem I was having. I normally would have used pre flashed paper but that would mean starting all over again with a pre-flashed test strip. I chose the simpler route of dialing in a harder grade, in this case 4, before burning in the sky and face of the building.

The red area indicates the over lap area of the mask.

Something to consider:

When using this method certain negatives can produce a grainier look to the picture which may not be to your liking and you need to be careful not to knock the masking frame when changing the settings and using the mask.

The burning in method:

It takes practice to get this method to look natural, which is easy to master when you have a nice defined area without things like buildings poking up above the horizon. A piece of card is needed to use as a mask. You do not need to use black card but if you have some all well and good. Otherwise any card will do, if one side is brighter than the other you should always make that side face the lens to reflect the light back. In my opinion you should make the mask smaller than the site that needs covering. Because the card is kept moving it will make up for the under size when used with an up and down motion. If you don't you can end up with a lighter shaded area a bit like an out line you would get if it was still. When you get it right it is very satisfying.

 Result:

I used forty seconds at grade four to burn in the building and sky. How did I know it would work? I further considered the segmented test print, took a calculated risk and listened to the little voice in the back of my head. In other words I went with the creative flow.

 

Basic outline for split grade printing.

Paper fixing faults.

This post will be short, a sort of quick guide to paper fixing faults. They are listed in no particular order.

This picture shows the fix is exhausted

•         Brownish areas: fix exhausted.

 

•         Print becomes yellow after a while: Was not fixed for long enough and    or  washed for to short a time.

 

•         Burnt out highlights: acid fix not diluted to the right strength. Left in the fix for to long. Not timed properly.

 

•         Brownish spots, Lilac round the edges: Stop bath exhausted, incomplete fixing, forgotten to wash or use stop after the developer.

 

The blue stain shows that the stop is exhausted.

•         Yellowish fog over the entire paper surface: Exhausted fix, developer contaminated fix, little or no agitation while fixing.

 

It is not unusual to be caught out by some of these faults. Even when you have years of experience.

Alternative way to check your fix is still fresh.

Here are two simple and easy ways of checking that the fix is not exhausted. The bottom line is if in doubt, throw it out.

1. Take a drop of fix and place it on some blue litmus paper, if it turns red the fix is still active, if the paper remains blue it is exhausted. Rapid acting fixes by their nature will get exhausted more quickly than an ordinary one. When fixing paper you may expect to get thirty to forty 18 x 24 cm ( 8”x 10”) sheets per litre.
2. Take ten ml of fix and add ten drops of potassium iodide solution to the measuring jar and stir. If the milky solution does not clear after it has been shaken then the fix is exhausted and a new batch should be made up. If it clears the fix is OK to use. Make up your Potassium iodide solution from two point five grams of powder and add a thousand ml of water and mix. This method does not apply to rapid fixes.

These methods will work for your film fixes as well. But the milk test you do for film will not work with paper as you cannot see this stage with paper.

A fixing question.

This is the second most important part of the process after development. Proper fixation ensures the longevity of your prints and negatives. Fix works by removing the unused silver bromide particles from the film or paper. If not done properly, over time they turn black ruining the image.

 

The way the fix works on the emulsion is to chemically convert the remaining silver bromide into complex argentothiosulfate an insoluble  and unstable compound which after a few seconds can be seen on the film  as a milkiness (not visible on prints) this should be allowed to continue until it has disappeared otherwise the negatives will turn black. As the process continues the fresh hypo from agitation turns the insoluble into soluble sodium  argentothiosulfate which can be washed away in water. The fixing of the image is quite quick, it is turning the by products into a water soluble compound that takes the time.

The darkroom practitioner needs to be carefully when choosing a fix as some cause staining when being used with paper. There are three types: alkali, plain, and acid.

•         Alkali are the most modern and efficient with today’s emulsions. They are the easiest to wash out of papers and cannot be over fixed.

•          Plain is a mix of Hypo (thiosulfate) and water that should be used as part of a two bath system, then only as a second one as it can cause staining and other problems.

•         Acid fixes are known to be quick and should be timed carefully as they can cause bleaching. Hence the reference rapid.

Some fixes come with hardening and should not be used if you are thinking of toning prints. Otherwise it is down to personal choice.

Film Fixing.

 

A lot of people ask how long will the fix stay fresh and how many rolls it will process. I mix up  1000 ml or 1200 ml  depending on how many rolls of 35mm and or 120 format I think will be processed at the same time. ( I  use a different fix for paper) I keep the fix until I have developed a mix batch of between twelve and fourteen rolls. Which can take some months to achieve.

 

The film has a milky look after one minute in the fix

There is a more scientific way of being sure what the limits of the fix are for yourself. It can only be done with a fresh batch of fix. After the film has been in the fix for a minute you open the process tank, checking to see if the milkiness has cleared. If it has then give the film a further three minutes this will also establish the time the film needs to be fixed for. You will need to do this check  with subsequent films until the clearing time is double what it was when the fix was fresh. Having kept a check on how many films you have processed this will give you a safe number per litre for the future, hence removing the need to check each time. There are other method for checking fix life which will be posted later.

Paper fixing.

There are two methods to choose from.

•         Two bath method. This where two lots of fix are made up and set side by side. The first bath does all the work, with the second bath removing any argentothiosulfate that have not  been converted to sodium argentothiosulfate in the first place, making for a more complete final wash. Once the first bath is exhausted (which you will need to test for), the second bath becomes the first and a new one is mixed for the second. When the second now first bath is exhausted both should be ditched and two fresh fixes made up.

I use this method occasionally If I'm toning. To get round all the testing you need to know how many prints you can get out of the fresh  bath and the partly used second, for each of the sizes you print most often. It is a lot of work to start with.

 

•         Single bath. Is a fast acting concentrated fix that takes one minute to do the job. This method needs to be timed exactly; to leave it longer will negate  its advantages. Most of the fixing is done in the first fifteen seconds, to leave it longer than one minute will allow complex compounds to build up making them difficult to wash out.

 

I use this method most of the time partly because I do not have a lot of time to spend when printing and the other is I do not do a lot of toning.

Please note: when fixing papers you should check what the manufacturer suggests in the instruction provided with the paper. I have noted the recommendations have changed since writing this article.